24/7 Free Online Support all over India | Guranteed Lowest Price | All over India Shipping
1. Press the ON/OFF key to turn on the camera. Press the ON/OFF key for 3 seconds to turn it off. (When the camera is on, you may press Reset for 5 seconds to restart the camera for factory settings)
Specific mode is as follows:
If you are not clear what mode it is, reset the camera and switch to point-to-point mode.
Note: This reset works only when the blue light is always on or flashes slowly. Press the Reset key for about 5 seconds until the indicators all go out, and let go until the camera starts (about 30 seconds.
Method 1.
Method 2.
Note: If you scan with WeChat, when (Figure 2) appears, click the browser in sharing in the upper right corner to open and download the software. After downloading and installing, the following icon appears on the mobile phonel
Click Cancel point-to-point short-range viewing (point-to-point is connected and viewing allowed) and click Yes to fast pair router and enter remote viewing (If you need to set up remote, please continue to read the instructions and follow the steps)
Note: When connecting to remote, make sure you enter the correct WIFI password. Otherwise, the camera will restart automatically after clicking OK. However, due to the wrong password, the camera will not be online, and then you need to reset it and re-pair.
Specifications and parameters
Reminder: What Micro SD Card is required for recording? Why can't l use my Micro SD Card for recording? The camera supports up to 128 GB Micro SD card. Please use High Speed Class 10 FAT formatted memory card. You must format the Micro SD before using. If SD card is not recognized when inserted into camera, just remove and re-insert.
Why can't the camera go online?
Why is remote monitoring not smooth? You should choose a suitable resolution to watch according to your internet speed. Why I can't save to my SD card? SD Card must be formatted if this is your first time to use it.
How do I when I forgot my password? Press reset key for 10 seconds and restore the factory setting.